Network Working Group Scott Bradner Internet-Draft Harvard University October 1998 Secret Handshakes: How to get RFCs published in the IETF 1. Status of this Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet- Drafts as reference material or to cite them other than as "work in progress." To view the entire list of current Internet-Drafts, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). This document will expire before February, 1999. Distribution of this draft is unlimited. 2. Abstract There is confusion over how to get an RFC published in the IETF. Recently a long time IETF participant asked me what "secret handshake" was need to get documents published as RFCs since he had been trying unsuccessfully to get that done. This memo is the result of that query and describes the procedures required, gives the proper references and the required email addresses. 3. RFCs RFC once meant "Request for Comment" but "RFC" is no longer viewed as an acronym but as a stand-alone term. RFCs make up the publication series of the IETF. All major IETF documents are published as RFCs. The series started in April, 1969 as a way to communicate between a few people who were working on the early ARPANET. Early RFCs were designed to convey specific information such as the minutes of meetings or to solicit comments on ideas or proposals. In the years since 1969 RFCs mutated into being more of a way to publish specific Bradner [Page 1] Internet-Draft Secret Handshakes September 1998 information than a way to propose new ideas. A seperate, temporary series for publications called "Internet-Drafts" was established to take over the original requesting comments function. 4. Types of RFCs RFCs can be the product from an IETF working group or of an individual or group of individuals. RFCs can also be targeted for the IETF standards track or not. Each case is handled differently but there are four basic categories: RFC Editor and IANA documents, IETF working group documents, standards track documents not from IETF working groups, and non-standards track documents not from IETF working groups. (RFC 2026, section 2.1) 5. RFC Editor and IANA documents From time to time the RFC Editor publishes an RFC which describes how RFCs should be formatted (currently RFC 2223) and every April Fools Day one or more RFCs are published that are meant as parody or attempts at humor. These RFCs are published at the discretion of the RFC Editor. Also from time to time the IANA publishes a new version of the Assigned Numbers RFC to provide a record of protocol number and parameter assignments. The IANA also periodically publishes a new version of the Internet Official Protocol Standards RFC that describes the state of standardization of protocols. These RFCs are published at the discretion of the IANA. 6. Common process features for other RFCs All documents proposed as RFCs other than those mentioned in section 5 must first exist as Internet-Drafts and are reviewed by the IESG prior to publication. The IESG has the responsibility to review each document that is put forth for publication as an RFC. The IESG can approve a document for publication as-is or it can approve publication only if an "IESG note" is added to the beginning of the document describing any particular IESG concern with the document. The IESG can also refer a non-working group document to a working group for consideration or refer, with comments, a working group document back to the working group for additional work. Finally the IESG can decide that the document does not meet the quality or other standards for publication which the IESG is charged with maintaining. 7. Internet Drafts Documents to be published as Internet-Drafts should be emailed to internet-drafts@ietf.org. The documents must be formatted according to the instructions in ftp://ftp.ietf.org/ietf/1id-guidelines.txt and should be sent as plain text, not as a word processor enclosure. (RFC 2026 section 2.2) Bradner [Page 2] Internet-Draft Secret Handshakes September 1998 8. IETF working group documents An IETF working group requests publication of a working group document by sending email to the Area Directory responsible for the working group, with a copy of the email to iesg-secretary@ietf.org. The document(s) to be published must already be published as Internet-Drafts or, in the case of changing the status of an existing RFC without changing the contents, as an RFC. The letter should list the file names of the Internet-Drafts or the numbers of the RFC and what type of RFC each document is being offered for. The current standards track RFC types are: Proposed Standard, Draft Standard, Standard and Best Current Practice (BCP). The current non-standards track RFC types are: Informational, Experimental, and Historic. (RFC 2026, sections 4 and 5) The copy of the email to iesg- secretary@ietf.org is to ensure that a record of the request is entered in a tracking database. The request is then processed as described in RFC 2026 section 6.1.2. 9. Non-working group, non standards track documents An individual requests the publication of a document as a non- standards track RFC by sending an email request to the RFC Editor (rfc-editor@rfc-editor.org). The document(s) to be published must already be published as Internet-Drafts and the email request must include the filename of the Internet-Draft. The RFC Editor will inform the IESG of the publication request and ask that the IESG review the document within a reasonable time. (RFC 2026, section 4.2.3) 10. Non-working group standards track documents An individual requests the publication of a document as a standards track RFC by sending an email request to the IESG (iesg@ietf.org) with a copy of the email to iesg-secretary@ietf.org. The document(s) to be published must already be published as Internet-Drafts and the email request must include the filename of the Internet-Draft or RFC number and the type of RFC that each document is being offered for. In order for a non-working group document to be published in the IETF standards track an IESG member must agree to "champion" the document within the IESG. In general it would be a good idea for anyone wanting to publish a standards track document without an IETF working group to line up such a "champion" on the IESG before submitting their request. The request is then processed as described in RFC 2026 section 6.1.2. 11. Intellectual property rights It is important for every one who is publishing any IETF document to read and understand the intellectual property rights section of RFC 2026 (section 10). The act of submitting a document for publication by the IETF implies the acceptance of the intellectual property rights terms and conditions in RFC 2026. Authors should particularly Bradner [Page 3] Internet-Draft Secret Handshakes September 1998 note the copyright provisions. 12. Security Considerations This type of non-protocol document does not directly effect the security of the Internet. 13. References RFC 2223: J. Postel, J. Reynolds - "Instructions to RFC Authors", October 1997 RFC 2026: S. Bradner (Ed) - "The Internet Standards Process -- Revision 3", October 1996 14. Author's Address Scott Bradner Harvard University 1350 Mass Ave, rm 876 Cambridge, MA 02138 USA phone: +1 617 495 3864 sob@harvard.edu Bradner [Page 4]